Creality LD-002R, the most cost-effective resin 3D printer. It is big progress for the resin 3D printer and Creality 3d R&D team. The Creality LD-002R resin 3d printer presents a clean and uncluttered user experience with a well thought out design that defuses many of the irritants people have had with other, similar budget printers.
LD-002R Resin 3D Printer Features
BUILD AND MOTION ：Great emphasis is being placed on the Creality LD-002R 3D printer's robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.
ANTI-ALIASING：MSLA 3d printer uses an LCD screen to mask an image of a layer over a UV light source.
Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface.
Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
QUICK LEVELING: Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the Creality LD-002R 3d printer is quick leveling.
Four hex screws feature on the print plate — loosen them before dropping the plate, and it will to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.
PERFORATED PRINT PLATE: Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate.
Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it's unusual, and perhaps even distracting overkill, to see it on a smaller machine. It's not a bad thing, but it makes you wonder why they did it.
AIR FILTER：A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.
- LD-002R Resin 3D Printer Properties
- Modeling Technology: LCD
- Print Size: 119x65x160mm
- Print Speed: 20-30mm/h
- Print support: Automatic/Manual
- XY Axis Precision: 0.075mm
- Print Method: USB
- File Format: STL/CTB
- LD-002R Resin 3D Printer Hardware
- Machine Size: 221x221x403mm
- Package size: 295x295x545mm
- Nominal voltage: 100-240V
- Output Voltage: 12V
- Nominal Power: 72W
- LD-002R Resin 3D Printer Extruder Hardware
- Layer Height : 0.01-0.05mm
Product Article: Is the Creality LD-002R 3D Printer right for you?